Aeroflex Non Asbestos Thermal Insulation Mill Board is a compressible, high- temperatures material developed for many industrial applications. This Mill Board can be easily cut, drilled, stamped, using simple equipment such as woodworking tools. It is versatile for a wide range of possibilities in high temperature and thermal insulation applications, including gaskets, insulators, spacers, joints, thermal insulating cover, complex shapes, etc. Aeroflex Millboard is a compressible, high-temperatures material developed for many industrial applications. This Mill Board can be easily cut, drilled, stamped, using simple equipment such as woodworking tools. It is versatile for a wide range of possibilities in high temperature and thermal insulation applications, including gaskets, insulators, spacers , joints, thermal insulating cover, complex shapes, etc.
S. No. | PARTICULARS | UNITS | HYPERSIL TEST SPECIFICATIONS |
---|---|---|---|
1. | Density (Nominal) | gms/cc | 1.15 |
2. | Tensile Stength | kg/cm |
20 |
A. Along Grain (Min) B. Across Grain (min) |
kg/cm |
10 | |
3. | Loss on Ignition (Max) | % | 15 |
4. | Moisture Content (Max)% | 2 | |
5. | Thermal Conductivity | W/m℃ | 0.116 |
6. | Electrical Strength | kv/mm | 1.5 |
7. | Temperature Resistance | 500℃ or higher if suitably supported | |
8. | Flame Test | Does not get burnt when held in flame | |
9. | Thickness Availability | 1.0-25mm | |
Specification Compliance |
There are no seperate specification for asbestos free material. However the properties of the asbestos free material. Match closely with those of the asbestos material. |
The technical data contained herein are based on laboratory tests and represent the general property of the material. This technical data sheet is for general reference only and should not be used as a purchase specification, or a design basis as the Gasket performance may also be affected by media and other factors. One should not, therefore draw any conclusion regarding the behaviour of the material in a Finished Gasket. Hence these specifications shall not form any basis of our liability for any warranty claim. We would therefore, request a reference be made to us for confirmation of applicable.